|
19
8-Channel Receiver HT200E
warnIng:
The use of this remote control is only permitted in
combination with equipment in which radio interference to the
transmitter or receiver does not result in danger to persons or property.
Furthermore manual overriding emergency stop should be integrated in
the setup. The remote control of devices and systems with an increased
risk of accidents is not allowed. Crane and lifting equipment of any kind
may not be used in connection with this remote control. The directives
ZH 1/547 are not met.
This remote control may only be operated if the operated device is
clearly visible. For damages of any kind caused by external influences,
for faulty connections or negligent operation, no liability will be taken.
fOr yOur SafETy:
Be extremely cautious when you are switch ing
230V devices! There is the danger of an electric shock! All instal la-
tion and maintenance on the power supply and the device must be
performed by a qualified electrician only. A qualified person is defined
by education, training and experience. Qualifications for a reliable
installation are also required in the field of wireless transmission, of
control commands, relevant health and safety regulations, accident
prevention regulations, directives and generally accepted engineering
standards. (E.g. DIN standards and VDE regulations), technical rules
and regulations to such an extent, that installation can guarantee a
safe working condition of the equipment for the wireless transmission
control commands.
– Disconnect power
– Make sure that the device cannot be switched on again during
maintenance or installation.
– Check the device for the absence electrical current before starting
maintenance or installation.
– Before switching on the device, make sure that the housing is securely
closed and that no life wires can be touched.
