27
Fig. 47
Fig. 48
Fig. 49
Here, you can adjust your pulse speed/frequency from
0.4 to 20.0 PPS in AC and 0.4 to 999.9 PPS in DC by
turning encoder
F
(
Fig. 11
). After selecting your
desired pulse speed/frequency, press button
C
(
Fig. 11
;
the green arrow in this instance) to revert back to the
main TIG welding screen (
Fig. 48
).
The pulse symbol (
Fig. 49
) on the left-hand side of the
screen indicates that the machine is now in pulse mode.
To turn the pulse feature off, press button
C
(
Fig. 11
)
followed by button
D
(
Fig. 11
).
From the TIG 2T main screen, you can enter the setup
menu by pressing button
E
(
Fig. 11
) three (3) times.
Pressing button
E
one (1) time brings you to the
sequencer screen, pressing button
E
two (2) times
brings you to the hot-start screen, and pressing button
E
three (3) times brings you to the TIG - SETUP (system
settings) screen (
Fig. 50
).
Water-Cooler: ON - OFF
Use the water-cooler feature only when using a water-
cooled torch with an HTP America® smart water-cooler.
With the water-cooler feature turned on, the, machine
controls the smart cooler and the pump and fan work on
-demand. To ensure proper operation, it is essential to
not only turn the cooler on, but to also activate the water
-cooler function in the software. If you use an air-cooled
torch, the water-cooler function MUST BE turned off to
avoid false alarms and interruption of the welding arc.
If you purchased an Invertig 313 with the Arctic Chill
water-cooler option, where the cooler plugs directly into
a wall outlet and not into the back of the machine like
the smart cooler, you need to turn the water-cooler
feature off as the stand-alone Arctic Chill is not a smart
cooler and is not controlled or monitored by the
Invertig.
1ph MAX Amps: 300 - 350 (Invertig 400 Only)
This function allows a software limitation of the welding
output when using the machine on single-phase power.
Instead of having 350 amps of max power available, this
feature allows you to limit the machine output to 300
amps so a CK230 torch can be safely used without the
risk of accidental damage to the torch.
Pipe Mode: ON - OFF
We specifically designed the Pipe Mode for pipe welding
and pipe weld training to simulate an engine drive. For
full details on Pipe Mode, please refer to section
7), o)
on
page 18
of the manual.
Fig. 50
Fig. 51
Содержание Invertig 313
Страница 6: ...6 Fig 1 ...
Страница 33: ...33 12 WIRING DIAGRAM Invertig 400 AC DC ONLY ...
Страница 34: ...34 13 EXPLODED VIEW INVERTIG 400 AC DC ONLY ...
