HTP EVR 040, Инструкция по использованию и уходу

Страница: 6 / 22

6
B. SPECIFICATIONS AND PERFORMANCE RATINGS
Figure 1
– LP-379-J
SPECIFICATIONS AND DIMENSIONS WATER TEMPERATURE RATINGS
MODELS
STORAGE
CAPACITY
(GAL)
A B
HOT / COLD
WATER INLETS
SHIPPING
WEIGHT
(LBS EST.)
MIN.
DELIVERED
TEMP.
MAX.
DELIVERED
TEMP.
HIGH TEMP.
LIMIT
EVR040 40
54 ¼”
19 ½” ¾” NPTM
104 110
o
F
(43.3 C)
150
o
F
(65.5 C)
170
o
F
(76.6 C) EVR050 50
66 5/8”
118
Table 1
– Specifications and Dimensions – See Table 2 for a Listing of Available Elements
# ELEMENTS
AND THERMOSTATS
AVAILABLE WATTAGE VOLTAGE
FULL LOAD CURRENT IN AMPS
Single Phase
2
3,000
240
13
4,500
19
Table 2
– Listing of Elements and Corresponding Voltages / Wattages / Amperages
C. LOCATING THE WATER HEATER
Locate the water heater where any leakage from the relief valve, related piping, tank, or connections will not result in damage to
surrounding areas or lower floors of the building. The water heater should be located near a floor drain, or installed in a drain pan. HTP
WILL NOT be held liable for leakage damages.