HTP EL-110, Руководство по установке

Страница: 91 / 97

91
BOILER START-UP REPORT
LIGHT OFF ACTIVITIES
DATE COMPLETED ________________
1) Fill the
heating
system
Check all piping and gas connections,
verify all are tight
Pressurize system (12
– 15 psi)
____ PSI
Add water to prime condensate cup
Percentage of glycol in system (0
–
50%)
____ %
Verify near boiler piping is properly
supported
2) Check
gas pipe Leak test using locally approved
methods (consult jurisdictional code
book)
Check incoming gas pressure (3.5” to
14” W.C.)
____ in w.c. Static
What is the “drop” on light off (No more
than 1” W.C.)?
____ in w.c. Dynamic
3) Check
combustion Check and adjust (if necessary) carbon
dioxide content
____% CO2 High Fire
____%
CO2
Low Fire
Check and adjust (if necessary) carbon
monoxide content ____ppm
CO
High Fire
____ ppm
CO
Low Fire
4) Verify
system
operation
Turn up thermostat to verify wiring
connections
5) Record
ionization
current
Check uA reading at d7 on the status
menu (see start-up section)
____ uA High Fire ____ uA Low Fire
6) Indirect
water heater Verify safety and operation of the
indirect water heater, record settings
____de ____dh
7) Convert
the boiler If necessary, convert the boiler to the
proper gas type
Locate the stickers in the appropriate
locations on the boiler
Verify combustion settings after gas
conversion, Carbon Dioxide
____% CO2 High Fire
____%
CO2
Low Fire
Verify combustion settings after gas
conversion, Carbon Monoxide ____ppm
CO
High Fire
____ppm
CO
Low Fire
Mail in the conversion registration
8)Record
system
settings Record heating curve, record steps
____*8 ____*9 ____*10 ____*11
Notes:
Table 28