HTD Lync 12, Руководство пользователя

Страница: 15 / 28

A global IR input (labeled “IR IN”) is included on the back of the Lync controller. This allows you to connect
an IR receiving eye (sold separately) and pass IR signals to centrally located equipment. An IR eye is often
installed in a nearby room such as a dedicated theater room or family room with surround sound installed.
Three conductors of a Cat cable are typically used to connect the IR eye to the central Lync controller.
IR commands received at this eye are ONLY output through the Global IR output on the back of the Lync
controller. Connect a dual IR emitter to the Global IR Out so that you can control two devices.
An IR eye Panel (IRP) can be connected to
the open RJ-45 port on a LyncTouch and
installed in a convenient location within a
zone. The eye receives its power over the
Cat cable and passes the IR signal back to
the central Lync controller for the purpose of
controlling centrally located devices (that can
be controlled via IR).
The Lync Controller includes 5 Routed IR
emitter outputs and 1 Global IR emitter output.
IR emitters (sometimes called “flashers”)
connect to these ports and “flash” IR signals
received by an IR eye. Routed IR means that IR signals are routed only to the source currently selected
on a LyncTouch. This allows you to have two of the same source (such as two DirecTV or Cable boxes)
but only control the one you want. Global IR will output all of the IR signals allowing you to control a device
even when it is not selected for that zone.
15
How to Connect
Making Use of Infrared (IR) Capability
To Whole-house
Audio Controller
To Whole-house
Audio Controller
Use the double-sided tape included with the IR emitter
to attach the emitter to the device’s IR receiving eye.
This is a side view showing how the
IR emitter should be attached to the
device that is being controlled.
To Whole-house
Audio Controller
To Whole-house
Audio Controller
Lync
(back)
IR Emitters are sold separately
Single IR Emitter
Dual IR Emitter
AC 120V~60Hz
FUSE T2AL/250V
Power Consumption: 160W
ROUTED IR OUT
SOURCE INPUT
KEYP
AD PORT
S
7 8 9 10 11
12
MP3
L
ZONE 1 PREOUT ZONE 2 PREOUT ZONE 3 PREOUT ZONE 4 PREOUT ZONE 5 PREOUT ZONE 6 PREOUT
MONO STEREO MONO STEREO MONO STEREO MONO STEREO MONO STEREO MONO STEREO
R
L R L R
L R L R
L R L R L R L R
L R L R L R
R
L
4 3
2 1
5 6
IR IN
RS232
INTERFACE
GLOBAL
IR OUT
12V/DC
TRIGGER
100mA
IN OUT
System
TRIGGER
AC/DC 3-20V
Mute
Made in Taiwan
CAUTION
To Prevent Electric Shock,
Do Not Remove Cover. No
User-Serviceable Parts Inside,
Refer Servicing To Qualified
Service Personnel.
WARNING
To Prevent Fire Or Shock
Hazard, Do Not Expose This
Unit To Rain Or Moisture.
FIXED
VA
RIABL
E
IR IN
SOURCE 7
Global IR Out
to control source 10
IR Emitter
to control source 7
IR Emitter
Infrared (IR) Eye Examples
Power
1 2 3 4 5 6 1 2 3 4 5 6
7 8 9 10 11 12
Zone Status Source Signal Strength
AC 120V~60Hz
FUSE T2AL/250V
Power Consumption: 160W
ROUTED IR OUT
SOURCE INPUT
KEYP
AD PORT
S
7
8 9 10 11
12
MP3
L
ZONE 1 PREOUT ZONE 2 PREOUT ZONE 3 PREOUT ZONE 4 PREOUT ZONE 5 PREOUT ZONE 6 PREOUT
MONO STEREO MONO STEREO MONO STEREO MONO STEREO MONO STEREO MONO STEREO
R
L R L R
L R L R
L R L R L R L R
L R L R L R
R
L
4 3
2
1
5 6
IR IN
RS232
INTERFACE
GLOBAL
IR OUT
12V/DC
TRIGGER
DOOR
INTERFACE
100mA
IN OUT
System
TRIGGER
AC/DC 3-20V
Mute
Made in Taiwan
CAUTION
To Prevent Electric Shock,
Do Not Remove Cover. No
User-Serviceable Parts Inside,
Refer Servicing To Qualified
Service Personnel.
WARNING
To Prevent Fire Or Shock
Hazard, Do Not Expose This
Unit To Rain Or Moisture.
FIXED
VA
RIABL
E
IR IN
Lync
Sold Separately Model: IRP