Wiring a Zone for LyncTouch and Source Inputs
A unique benefit of Lync is the ease with which you can connect sources spread throughout the home
into the system – i.e. not all of your sources have to be located at the central equipment location. This is
achieved by adding a source input panel (sold separately) into any zone in which you want to connect an
audio source.
Our Standard Input Panel (SIP) connects to a LyncTouch using 5 of the conductors in a Cat cable. The
other input panels are active devices that connect using Cat cable with RJ-45 tips. These input panels
are Analog Input Panel (AIP), Bluetooth Input Panel (BIP), and Digital Input Panel (DIP). Active devices
connect either to an open port on a LyncTouch or an open port on the central Lync controller. Note: It is
possible to connect both a LyncTouch and an active source input panel to the same central RJ-45 port
with a special Y-adapter. Contact HTD for details.
Note: Both LyncTouch will
control the same zone.
10
CENTRAL
LOCA
TION
CENTRAL
LOCA
TION
POSSIBLE WIRING SCHEMES
INCORRECT WIRING SCHEMES
OR
OR
OR
OR
SIP
CAT CABLE
CAT CABLE
CAT CABLE
CAT CABLE
CAT CABLE
CAT CABLE
CAT CABLE
SIP
SIP
SIP cannot be connected
directly to central controller
Cannot connect more than
two LyncTouch to one zone.
Cannot connect more
than one active source
input panel per zone
AIP
AIP
BIP
BIP
BIP
DIP
DIP
DIP
