VEGA78
EN - 39
5.4.3. Start
and
Stop
These items permits to define the method to enable and disable the recordings with meter
(see § 5.4.10). The possible options are:
Manu
: Each recording is enabled/disabled in MANUAL mode by pressing
GO/STOP
key.
Auto
: Each recording is enabled/disabled in AUTOMATIC mode, starting from a setting
and valid date/hour
by preliminary pressing of GO/STOP
key.
The default configuration is always the MANUAL mode and the flags of these s are not
disable. To change from MANUAL mode to AUTO mode (see § 5.4.10.1) performs the
below steps:
1. Move the cursor using arrows keys on the field relative to “
Start:Manu
” or
“
Stop:Manu
”, marked with blue background.
2. Press
F4
key (alternatively touch the
MODIFY
at display). In the bottom of display a
command bar with “Manu” is shown.
3. Press
F3
key (
MOD(+)
) or
F4
(
MOD(-)
) and select “
Auto
” .
4. Use left or right arrows keys to moving on date and hour fields. Using the up arrow key
or
F3
(
MOD(+)
) key to increase the value and the down arrow key or
F4
(
MOD(-)
) key
to decrease the value.
5. Press
SAVE
or
ENTER
keys (or the smart icon
) to save the settings. The Automatic
mode and the set date/hour are shown at display.
5.4.4. Integration
period
This option permits to set the integration period (see § 10.5.1) which is the time interval
between two sequential recordings within the global duration of measurements. The flag of
this option is always active and not disabled.
1. Move the cursor using arrows keys on field relative to “
Integration period
” , marked it
with blue background.
2. Press
F4
key (alternatively touch the
MODIFY
at display). In the bottom of display a
command bar with “Integration Period” is shown.
3. Press
F3
key (
MOD(+)
) or
F4
(
MOD(-)
) or up and down keys to set the desired
integration period choosing among the below values:
1s, 5s, 10s, 30s, 1min, 2min,
5min, 10min, 15min, 30min, 60min
.
4. Press
SAVE
key or
ENTER
key (or the smart icon
) to save the settings. The
integration period value is shown at display.
5.4.5. Cogenerations
The selection of this , effected both by using up or down arrows keys and directly selecting
the flag at display, enters the values of powers and energies generated (co-generation) in
the list of recorded parameters (see § 10.4.1).
Shop for Power Metering products online at:
1.888.610.7664
www.
PowerMeterStore
.com
