HT VEGA78 Скачать руководство пользователя страница 17

Страница: 17 / 103

VEGA78

EN - 16

5.1.6. Auto power off setting

The meter permits to enable or disable the auto power off option in order to prevent a
quick discharge of internal battery. This feature, if selected, is active under each of the
following conditions:



No action was performed both any key or touch display for at least

5 minutes



Meter does not supplied with external adapter.



Meter does not in recording running.

The effect is a long sound before turn off of meter.

1. Move the cursor using arrows keys on the field relative to “Auto power off”, marked with

blue background, see

Fig. 15: Auto power off setting screen

2. Use

keys (alternatively touch

MOD(+)

MOD(-)

) for enable “

YES

” or disable

“

” auto power off.

3. Press

SAVE

ENTER

keys (or the smart icon

) to save the selected option and

confirm by “Ok”. This selected parameter will be present also after turning off the meter.

4. Press

ESC

key (or the smart icon ) to quit without saving any modification.

Shop for Power Metering products online at:

1.888.610.7664

www.

PowerMeterStore

.com

Содержание VEGA78








































































































Результаты поиска

Содержание VEGA78

Отзывы:

Бренды по названию

Популярные бренды

HT VEGA78, Руководство пользователя

Результаты поиска

Содержание VEGA78

Отзывы:

Бренды по названию

Популярные бренды