manualshive.com logo in svg

HS-Technik RoboRiv, Руководство по эксплуатации, Страница: 31 / 64

Поделиться
Скачать
HS-Technik RoboRiv Скачать руководство пользователя страница 31

- 31 -

4.4.10  Use of tools and maximum load

In order to avoid damages as a result of excess temperatures during continuous operation 

it is important to ensure sufficient break times during the installation process.

If the tool should go into an automatic shut-down (tempFET) 

as a result of excess temperatures, the pause times should 

be reviewed and adjusted.

Continued work is only possible after a cooling off period in order to protect the tool from 

lasting damage.

4.4.11  Charge state of the battery

NOTE

The tool will only start if the battery has sufficient charge capacity.

When fully charged the battery will display the charge state on the display on the left side 

as a green battery symbol. As the battery voltage decreases the colour of the symbol will 

change to yellow and then red. When it reaches red an additional warning signal will sound, 

the display will read „warn batt“ and recommend changing the battery. After several addi

-

tional installations the tool will no longer start and the display will read „batt low 2“ with a 

crossed through battery. The battery must then, at the latest, exchanged (see 4.2.1).

Содержание RoboRiv

































































Отзывы:

Нет отзывов