HS-Technik RoboRiv Скачать руководство пользователя страница 12

Страница: 12 / 64

- 12 -

2 General safety information for power tools

DANGER

Read all the safety information, instructions, illustrations and technical data

which is provided with this power tool. Failure to follow the instructions

below may result in electric shock, fire and / or serious injury.

WARNING

This power tool was manufactured in according with current state-of-the-art

technology and recognised technological safety guidelines. However, its use

may jeopardise the health and life of the user or third parties, or risk damage

to other property.

WARNING

The workplace must only be used in accordance with its intended use and in

absolutely perfect condition.

NOTE

Keep all safety information and instructions for the future.

The term “power tool” used in the safety information refers to mains-operated power

tools (with mains cable) and to battery-operated power tools (without mains cable).

2.1

Use and handling of power tools

Do not overload the power tool. Use the power tool specific for the work you are

doing.

With the appropriate power tool you will work better and more safely in the

power range indicated.

Do not use any power tool which has a defective switch.

A power tool which can no

longer be switched on or off is dangerous and must be repaired.

Remove the detachable battery before you make changes to device settings, change

application tool parts or put away the power tool.

This safety measure prevents

unintentional start up of the power tool.

Содержание RoboRiv

































































Результаты поиска

Содержание RoboRiv

Отзывы:

Бренды по названию

Популярные бренды

HS-Technik RoboRiv, Руководство по эксплуатации

Результаты поиска

Содержание RoboRiv

Отзывы:

Бренды по названию

Популярные бренды