manualshive.com logo in svg

HS-Technik PowerRiv HST-PR, Руководство пользователя

Поделиться
Скачать
HS-Technik PowerRiv HST-PR Скачать руководство пользователя страница 25

- 25 -

- 25 -

1

2/3

4

4.4.4 Setting the fi rst rivets

Insert the mandrel end of the rivet into the nosepiece of the riveting tool.

Make sure that the rivet rests securely in the nosepiece of the riveting tool. 

1.  Using the riveting tool, insert the rivet into the holes in the parts to be joined.

2.  Press the riveting tool against the component until the rivet rests fi rmly against it and 

  the riveting tool pressure switch is activated. Maintain light pressure during the rivet 

  setting operation in order to ensure an optimal result.

3.  Press the start button to begin the rivet setting operation. 

  The jaws close and grip the mandrel. The rivet is compressed until the mandrel 

  detaches at the break point. 

4.  The jaws then open, the detached mandrel is released, and the mechanism returns 

  to its initial position. By tilting the riveting tool backward, the mandrel falls into the 

  collection container at the rear of the tool.  

Im Martelacker 12 – D-79588 Efringen-Kirchen – Phone 0 76 28 - 91 11- 0 – Fax 0 76 28 - 91 11-90

E-Mail: [email protected] – Web: www.hs-technik.com

Содержание PowerRiv HST-PR
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды