- 11 -
2.5. Structural modifications
No changes, additions or modifications may be made to the tool without the permission
of the manufacturer.
All modifications require written confirmation by HS-Technik GmbH.
!
Lithium ion batteries hold their charge almost indefinitely and are not subject to
memory effects.
With proper care, you can reliably power your tool for years to come
(approx. 700-1000 charging cycles).
In summary:
Avoid completely discharging or overcharging lithium ion batteries under
all circumstances. Doing so will ruin them.
2.4.5 Battery chargers
a) Do not charge the battery at temperatures UNDER 50°F/10°C or OVER 100°F/40°C.
b) The battery charger must not be connected to a step-up transformer, generator
or DC outlet.
c) Make sure that the battery charger air vents are not covered or blocked.
d) Do not store the tool, battery charger or battery in places where the temperature
might exceed 120°F/50°C.
e) Never charge the battery in a box or closed container.
Should repairs or maintenance be required, use only original replacement parts.
j)
Batteries may leak under extreme operating conditions or high temperatures.
If a battery leaks, avoid contact with the skin or eyes.
Battery fluid is corrosive and
can cause chemical burns to body tissues.
If fluid comes in contact with the skin, wash
off immediately using soap and water, and then apply lemon juice or vinegar.
Should fluid get in the eyes,
rinse for at least 10 minutes with water and consult
a physician immediately.
k) Do not drop the lithium ion battery or subject it to physical shock.
l)
Clean the battery contacts regularly using cotton swabs
dipped in alcohol.
!
Im Martelacker 12 – D-79588 Efringen-Kirchen – Phone 0 76 28 - 91 11- 0 – Fax 0 76 28 - 91 11-90
E-Mail: [email protected] – Web: www.hs-technik.com
