Page 33
Huddle Hub User Guide
5.4 Sending and Receiving a Presentation with iOS
Receiving a Presentation
When you start a session, or when you join a session and nobody else is presenting, your screen will
appear similar to the following:
The passcode appears only if the room has been configured to be passcode-protected. In this case, you
have to tell the passcode to the other participants in order to allow them to join your same session.
If some other participant is already presenting, your screen shows the presenter's screen.
If a multi-presentation is in progress, you can select which screen you want to receive, by keeping
a finger on the screen until a selection window appears.
When receiving a presentation, you can zoom into the received image: double-tap on the screen with
three fingers to enter zoom mode. You can double tap with three fingers while keeping your fingers on
the screen after the second tap to control zooming by moving your fingers up and down the screen.
Double-tap with three fingers again to exit zoom mode.
Zoom mode is available if you enabled it:
1. Open Settings
2. Choose General
3. Select Accessibility
4. Select Zoom and enable it
Presenting
In order to present with iOS, you must enable Screen Recording:
1. Open Settings
