IT3/IT5
Connector System
PWB
A
SSEMBLY
N
OTES
Document Number:
ETAD-F0458
Revision 3.10
Page
29
of
73
JEDEC Tray for
IT3/IT5
300 Position
Receptacles
* All dimensions shown are in mm.
The difference between IT3 and IT5 receptacle trays is that IT5 trays are gray-colored.
6.3 Pre-bake
The connector body materials do not absorb water from the atmosphere; therefore
pre-bake
is not required
for IT3 and IT5 receptacles.
6.4 Pick-Point
Pick locations and dimensions for IT3 and IT5 receptacles are shown below. Pick points are
located at the geometric centers of receptacles.
Removable metal cap
on 300 pos receptacle
17
20
3
Tape Removal
17
16
3
Tape Removal
13.5
Φ
15
Φ
10
Φ
15
Nov.1.2022 Copyright 2022 HIROSE ELECTRIC CO., LTD. All Rights Reserved.