HPE StoreEver LTO 3 Скачать руководство пользователя страница 49

Страница: 49 / 54

Related information

The following documents provide related information:

•

‘Start here' poster for an overview of the installation information in this guide (available in
English, French, German, and Japanese)

•

UNIX, Linux, and VMS Configuration Guide for configuration information on non-Windows
systems (available in English only)

You can find these documents on the Manuals page of the Hewlett Packard Enterprise Support
Center website:

http://www.hpe.com/support/hpesc

Product documentation is available in the Storage section of the Hewlett Packard Enterprise
Information Library.

http://www.hpe.com/info/storage/docs

To find documents for this product:

In the

Products and Solutions

pane, select

StoreEver Tape

, the types of documents and

your language.

In the

StoreEver Tape

pane, select

StoreEver LTO Ultrium Tape Drives

Rack stability

Rack stability protects personnel and equipment.

WARNING!

To reduce the risk of personal injury or damage to equipment:

•

Extend leveling jacks to the floor.

•

Ensure that the full weight of the rack rests on the leveling jacks.

•

Install stabilizing feet on the rack.

•

In multiple-rack installations, fasten racks together securely.

•

Extend only one rack component at a time. Racks can become unstable if more than one
component is extended.

Websites

Link

Website

www.hpe.com/info/enterprise/docs

Hewlett Packard Enterprise Information Library

www.hpe.com/support/hpesc

Hewlett Packard Enterprise Support Center

www.hpe.com/assistance

Contact Hewlett Packard Enterprise Worldwide

www.hpe.com/support/e-updates

Subscription Service/Support Alerts

www.hpe.com/support/softwaredepot

Software Depot

www.hpe.com/support/selfrepair

Customer Self Repair

www.hpe.com/info/insightremotesupport/docs

Insight Remote Support

www.hpe.com/info/hpux-serviceguard-docs

Serviceguard Solutions for HP-UX

www.hpe.com/storage/spock

Single Point of Connectivity Knowledge (SPOCK) Storage
compatibility matrix

www.hpe.com/storage/whitepapers

Storage white papers and analyst reports

Related information

Содержание StoreEver LTO 3























































Результаты поиска

Содержание StoreEver LTO 3

Отзывы:

Похожие инструкции для StoreEver LTO 3

Бренды по названию

Популярные бренды

HPE StoreEver LTO 3, Руководство пользователя

Результаты поиска

Содержание StoreEver LTO 3

Отзывы:

Похожие инструкции для StoreEver LTO 3

Бренды по названию

Популярные бренды