Figure 14 Connecting cables to the LTO-6 Ultrium 6250 and LTO-5 Ultrium 3000 tape
drive
Power connector
2.
SAS connector to tape drive
1.
Earlier generation LTO Ultrium tape drives:
Connect a spare power cord from the server's
internal power supply to the power connector on the tape drive.
Figure 15 Connecting cables to earlier generation LTO Ultrium tape drives
Power connector
2.
SAS connector
1.
CAUTION:
Never use a cable where power is supplied through the SAS connector because
using a powered cable may damage the drive. Always use a spare power cord from the
server's internal power supply. This caution does not apply to LTO-6 Ultrium 6250 and
LTO-5 Ultrium 3000 tape drives.
3.
There will be unused SAS cabling within the server because the other SAS connector is not
required in this configuration. Coil and secure the unused cabling so that it does not interfere
with other components inside the server.
4.
Now go to
.
20
Installing an internal LTO Ultrium tape drive
