HPE ProLiant XL230k Gen10, Руководство по техническому обслуживанию и ремонту

Страница: 35 / 73

5. Open the front bracket ( Opening the front bracket on page 29).
6. Remove the M.2 enablement backplane ( Removing and replacing the M.2 enablement backplane on
page 34).
7. Remove the SSD drive.
To replace the component, reverse the removal procedure.
Removing and replacing the cable retention clip
Procedure
1. Power down the server ( Power down the server on page 28).
2. Remove the server ( Removing the server on page 28).
3. Place the server on a flat, level work surface.
4. Remove the access panel ( Removing the access panel on page 29).
5. Remove the mezzanine card ( Removing and replacing the mezzanine card on page 36).
6. Remove the cable retention clip from the mezzanine card.
Removal and replacement procedures 35