54
Table 5 Command output
Field Description
SchemeName
Name of the RADIUS scheme.
Index Index
number
of
the RADIUS scheme.
Type
Type of the RADIUS server supported on the router:
•
Extended
—The RADIUS server uses the proprietary RADIUS
protocol of Hewlett Packard Enterprise for packet exchange.
•
Standard
—The RADIUS server uses the standard RADIUS protocol
for packet exchange. The protocol is compliant to RFC 2865 and
RFC 2866 or later.
Primary Auth Server
Information about the primary authentication server.
Primary Acct Server
Information about the primary accounting server.
Second Auth Server
Information about the secondary authentication server.
Second Acct Server
Information about the secondary accounting server.
IP
IP address of the server.
Port
Service port of the server. If no port configuration is performed, the default
port number is displayed.
State
Status of the server: active or blocked.
Encryption Key
Shared key for secure authentication or accounting communication,
displayed as a series of asterisks (
******
). If no shared key is configured,
this field displays
N/A
.
VPN instance
MPLS L3VPN to which the server belongs. If no VPN instance is specified
for the server, this field does not appear.
Probe username
Username used for server status detection.
Probe interval
Server status detection interval, in minutes.
Auth Server Encryption Key
Shared key for secure authentication communication, displayed as a
series of asterisks (
******
). If no shared key is configured, this field
displays
N/A
.
Acct Server Encryption Key
Shared key for secure accounting communication, displayed as a series
of asterisks (
******
). If no shared key is configured, this field displays
N/A
.
VPN instance
MPLS L3VPN to which the scheme belongs. If no VPN instance is
specified for the scheme, this field displays
N/A
.
Accounting-On packet disable
The accounting-on feature is disabled.
send times
Retransmission times of accounting-on packets.
interval
Interval at which the device retransmits accounting-on packets.
Interval for timeout(second)
RADIUS server response timeout period, in seconds.
Retransmission times for
timeout
Maximum number of attempts for transmitting a RADIUS packet to a
single RADIUS server.
Interval for realtime
accounting(minute)
Interval for real-time accounting, in minutes.
Retransmission times of
realtime-accounting packet
Maximum number of accounting attempts.
Retransmission times of
stop-accounting packet
Maximum number of stop-accounting attempts.
Quiet-interval(min)
Quiet interval for the primary server.
