HPE FlexNetwork HSR6800 series Скачать руководство пользователя страница 516

Страница: 516 / 538

503

Field Description

Rekeys Received

Number of rekey messages received.

IPsec SA Direction

IPsec SA direction: Both or Inbound (not supported at
present).

Group Server List

KS IP address list in the GDOI GM group. The list can
contain eight addresses at most.

Group Member

IP address of the GM.

VPN instance

VPN instance name of the MPLS L3VPN to which the
GM belongs.

Registration status

Registration status: Registered, Registering, or Not
registered.

Registered with

IP address of the KS with which the GM registers.

Re-register in

Period of time after which the GM re-registers with a
KS.

Succeeded registrations

Number of successful registrations.

Attempted registrations

Number of registration attempts.

Last rekey from

The KS from which the GM receives the last rekey
message.

Last rekey seq num

Sequence number of the last received rekey message.

Multicast rekeys received

Number of multicast rekeys received. This field is
displayed only when the GDOI GM group is a multicast
group.

Unicast rekeys received

Number of unicast rekeys received. This field is
displayed only when the GDOI GM group is a unicast
group.

Rekey ACKs sent

Number of rekey ACK messages sent. This field is
displayed only when the GDOI GM group is a unicast
group.

Allowable rekey cipher

The rekey encryption algorithm that the GM allows.

Any

indicates that the GM allows all encryption algorithms.

Allowable rekey hash

The rekey hash algorithm that the GM allows.

Any

indicates that the GM allows all hash algorithms.

Allowable transform

The rekey transform mode that the GM allows.

Any

indicates that the GM allows all transform modes.

Rekeys Cumulative

Rekey statistics.

Total received

Total number of rekeys that the GM has received.

After latest registration

Number of rekeys that the GM has received after the
last successful registration.

Rekey received ( hh:mm:ss)

The field is displays when a rekey is received. It
indicates the key lifetime after the rekey operation.

Rekey received

This field is displayed when no rekey is received. The
value for this field is

None

Total rekey ACKs sent

Number of rekey ACK messages sent. This field is
displayed only in unicast mode.

ACL Downloaded From KS 90.1.1.1

The ACL information downloaded from the KS at
90.1.1.1.

Содержание FlexNetwork HSR6800 series



























































































































































































































































































































































































































































































































































Результаты поиска

Содержание FlexNetwork HSR6800 series

Отзывы:

Похожие инструкции для FlexNetwork HSR6800 series

Бренды по названию

Популярные бренды

HPE FlexNetwork HSR6800 series, Справочник команд безопасности

Результаты поиска

Содержание FlexNetwork HSR6800 series

Отзывы:

Похожие инструкции для FlexNetwork HSR6800 series

Бренды по названию

Популярные бренды