198
Related commands
•
password-control
enable
•
display
password-control
password-control aging
Use
password-control aging
to set the password aging time.
Use
undo password-control aging
to restore the default.
Syntax
password-control aging
aging-time
undo password-control aging
Default
A password expires after 90 days globally. The password aging time of a user group equals the
global setting. The password aging time of a local user equals that of the user group to which the
local user belongs.
Views
System view, user group view, local user view
Default command level
2: System level
Parameters
aging-time
: Specifies the password aging time in days, in the range of 1 to 365.
Usage guidelines
The setting in system view has global significance and applies to all user groups. The setting in user
group view applies to all local users in the user group. The setting in local user view applies only to
the local user.
A password aging time setting with a smaller application range has a higher priority. The system
prefers to use the password aging time in local user view for a local user. If no password aging time
is configured for the local user, the system uses the password aging time for the user group to which
the local user belongs. If no password aging time is configured for the user group, the system uses
the global password aging time.
Examples
# Set the global password aging time to 80 days.
<Sysname> system-view
[Sysname] password-control aging 80
# Set the password aging time for user group
test
to 90 days.
[Sysname] user-group test
[Sysname-ugroup-test] password-control aging 90
[Sysname-ugroup-test] quit
# Set the password aging time for local user
abc
to 100 days.
[Sysname] local-user abc
[Sysname-luser-abc] password-control aging 100
Related commands
•
display
password-control
•
local-user
