18
Syntax
authorization lan-access
{
local
|
none
|
radius-scheme
radius-scheme-name
[
local
|
none
] }
undo authorization lan-access
Default
The default authorization method for the ISP domain is used for LAN users.
Views
ISP domain view
Default command level
2: System level
Parameters
local
: Performs local authorization.
none
: Does not perform any authorization exchange. In this case, an authenticated LAN user can
access the network directly.
radius-scheme
radius-scheme-name
: Specifies a RADIUS scheme by its name, a case-insensitive
string of 1 to 32 characters.
Usage guidelines
This command is supported only on SAP interface modules that are operating in Layer 2 mode.
The specified RADIUS scheme must have been configured.
The RADIUS authorization configuration takes effect only when the authentication method and
authorization method of the ISP domain use the same RADIUS scheme.
Examples
# Configure ISP domain
test
to use local authorization for LAN users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization lan-access local
# Configure ISP domain
test
to use RADIUS authorization scheme
rd
for LAN users and use local
authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization lan-access radius-scheme rd local
Related commands
•
local-user
•
authorization
default
•
radius
scheme
authorization login
Use
authorization login
to configure the authorization method for login users through the console,
AUX, or Asyn port, Telnet, or FTP.
Use
undo authorization login
to restore the default.
Syntax
authorization login
{
hwtacacs-scheme
hwtacacs-scheme-name
[
local
] |
local
|
none
|
radius-scheme
radius-scheme-name
[
local
] }
