155
MAC IP Vlan Interface
---------------------------------------------------------------------
000d-88f8-0eac 3.3.3.3 0 GigabitEthernet3/0/2
Total 2 user(s) matched, 2 listed.
Table 19 Command output
Field Description
Index
Index of the portal user.
State Current
status
of the portal user.
SubState Current
sub-status of the portal user.
ACL
Authorization ACL of the portal user.
Work-mode
User's working mode:
•
Primary.
•
Secondary.
•
Stand-alone.
VPN instance
MPLS L3VPN to which the portal server belongs.
MAC
MAC address of the portal user.
IP
IP address of the portal user.
Vlan
VLAN to which the portal user belongs.
Interface
Interface to which the portal user is attached.
Total 2 user(s) matched, 2 listed
Total number of portal users.
portal auth-network
Use
portal auth-network
to configure a portal authentication source subnet on an interface. You
can use this command to configure multiple portal authentication source subnets on an interface.
Then, only HTTP packets from the subnets can trigger portal authentication on the interface. If an
unauthenticated user is not on any authentication source subnet, the access device discards all the
user's HTTP packets that do not match any portal-free rule.
Use
undo portal auth-network
to remove a specific portal authentication source subnet or all portal
authentication subnets.
Syntax
portal auth-network
network-address
{
mask-length
|
mask
}
undo portal auth-network
{
network-address
|
all
}
Default
The portal authentication source subnet is 0.0.0.0/0, meaning that users in all subnets must pass
portal authentication.
Views
Interface view
Default command level
2: System level
Parameters
network-address
: IP address of the authentication source subnet.
