129
EAD fast deployment commands
EAD fast deployment commands are supported only on a SAP module that is operating in
bridge
mode.
dot1x free-ip
Use
dot1x free-ip
to configure a free IP. Users can access the segment before passing 802.1X
authentication.
Use
undo dot1x free-ip
to remove the specified or all free IP addresses.
Syntax
dot1x free-ip
ip-address
{
mask-address
|
mask-length
}
undo dot1x
free-ip
{
ip-address
{
mask
|
mask-length
} |
all
}
Default
No free IP is configured.
Views
System view
Default command level
2: System level
Parameters
ip-address
: Specifies a freely accessible IP address segment, also called "a free IP."
mask
: Specifies an IP address mask.
mask-length
: Specifies IP address mask length.
all
: Removes all free IP addresses.
Usage guidelines
When global MAC authentication or port security is enabled, the free IP does not take effect.
The maximum number of free IP addresses varies by device.
Examples
# Configure 192.168.0.0/24 as a free IP address.
<Sysname> system-view
[Sysname] dot1x free-ip 192.168.0.0 24
Related commands
display dot1x
dot1x timer ead-timeout
Use
dot1x timer ead-timeout
to set the EAD rule timer.
Use
undo dot1x
timer ead-timeout
to restore the default.
Syntax
dot1x timer ead-timeout
ead-timeout-value
undo dot1x
timer ead-timeout
