Specification
Value
Operating
3050 m (10,000 ft). This value may be limited by the type and
number of options installed. Maximum allowable altitude change rate
is 457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Hardware dimensions and clearance requirements
The following table lists the dimensions and clearance requirements for the HP Proliant DL380 G9
server.
Type
Description
Dimensions
Height: 4.29 cm (1.69 in)
Width: 43.46 cm (17.11 in)
Depth: 69.90 cm (27.50 in)
Weight (maximum: 10 drives,
two processors, two power
supplies, two heatsinks, one
Smart Array controller, seven
fans)
15.31 kg (33.36 lb)
Temperature and humidity requirements
The following table lists the temperature and humidity requirements for the HP Proliant DL380 G9
server.
Specification
Value
Temperature range
Note:
All temperature ratings shown are for sea level. An altitude derating of
1°C per 304.8 m (1.8° per 1,000 ft.) above sea level to a maximum of
3048 m (10,000 ft), no direct sustained sunlight.
Operating
10° to 35°C (50° to 95°F) Maximum rate of change is 20°C/hr (36°F/hr).
The upper limit might be limited by the type and number of options installed.
System performance may be reduced if operating with a fan fault or above
30°C (86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative humidity (non-condensing)
Table continues…
Installation
July 2016
Avaya CMS HPE DL20 G9 and DL380 G9 HIMT
18
