HPE Cloudline CL3100 Gen10, Руководство пользователя и по обслуживанию

Страница: 92 / 201

Software and configuration utilities 92
Software and configuration utilities
HPE BMC
BMC is a remote server management processor embedded on the system boards of the servers. BMC
enables the monitoring and controlling of servers from remote locations. HPE BMC management is a
powerful tool that provides multiple ways to configure, update, monitor, and repair servers remotely. BMC
(Standard) comes preconfigured on HPE servers without an additional cost or license.
Web GUI introduction
The web GUI is a friendly interface for the end users. A user can access the iBMC FW via a web browser,
and then go through the server status and do many configurations to the IBMC FW.
The default user privilege is set to administrator. The web function access rights are determined by
different privileges. For example, the administrator privilege can access all functions, but the user
privilege cannot.
The web GUI provides many useful functions, such as:

firmware update

system power control

system event log (SEL)

current sensor reading

configuration for: BMC network, user accounts, serial, PEF, alerts, and SOL

information about BMC and the system
IP address
Static and DHCP are the two common IP sources of iBMC FW. The default setting is DHCP. The detailed
IP address information is available from the BIOS setup menu.
User name and password
A user name and password are required to establish a web GUI session. The user should also have
accessibility to the LAN channel. Use the system management software to set the user name, password,
and grant access. The default setting is from the service tag.
Web browsers
iBMC FW supports either Microsoft Internet Explorer (Windows platform) or Firefox (Linux platform).
The embedded web server provides full access. The web GUI is accessible via the HTTP protocol or via
the encrypted HTTPS protocol.