HPE Cloudline CL3100 Gen10, Руководство пользователя и по обслуживанию

Страница: 177 / 201

Software and configuration utilities 177
Byte Field Description
8 : 9
Generator ID RqSA & LUN if event was generated from IPMB. Software ID if
event was generated from system software.
Byte 1
[7:1] - 7-bit I
2
C . Slave Address, or 7-bit system software ID [0]
0b = ID is IPMB Slave Address
1b = system software ID
Byte 2
[7:4] - Channel number. Channel that event message was
10
EVM Rev Event Message format version (04h)
11
Sensor Type Sensor type code for sensor that generated the event.
12
Sensor # Sensor number
13
Event Dir/ Event Type Event description area: Assertion or de-assertion event.
14
Event Data 1 As defined in this specification or IPMI2.0 specification.
15
Event Data 2 As defined in this specification or IPMI2.0 specification.
16
Event Data 3 As defined in this specification or IPMI2.0 specification.
Entering the pop-up boot menu
To enter the pop-up boot menu, press F11 during system boot when the
Press <F11> to enter Popup
Boot Menu
message displays.
The pop-up boot menu screen displays as shown in the following figure.
Entering PXE boot
To access PXE boot:
1.
Set Network as the first boot device in BIOS setup menu.
2.
Select Network device from the pop-up boot menu.
Entering the BIOS setup menu
The BIOS setup menu is accessible using the following methods:

Connect a USB keyboard, mouse, and VGA monitor directly to the server.

Use a console (or terminal emulator connected to a computer) through the serial port on the rear of
the server.
To access the BIOS setup utility menus:
1.
Press the power button on the front control panel to power up the server.
2.
Press ESC or DEL during system boot when the Press <ESC> or <DEL> to enter setup displays.