HPE Cloudline CL2600 Gen10, Руководство пользователя и по обслуживанию

Страница: 110 / 141

• Extend the server from the rack ( Extend the server from the rack ).
• Remove the server from the rack ( Remove the server from the rack ).
4. Remove the access panel ( Remove the access panel ).
5. Using a T-10 Torx screwdriver, remove the screws securing the serial port. Then, disconnect and
remove the serial cable.
To replace the component, reverse the removal procedure.
Removing and replacing a DIMM
To identify DIMMs installed in the server, see DIMM slot locations .
Prerequisites
Before replacing memory, read the memory configuration and population guidelines in the server user
guide.
Procedure
1. Power down the server .
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
110 Removal and replacement procedures