18
Examples
# Configure the VDP keepalive exponent on Ten-GigabitEthernet 1/0/1 as
23
.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] evb vdp timer keepalive exponent 23
# Configure the VDP keepalive exponent on Bridge-Aggregation 1 as
23
.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] evb vdp timer keepalive exponent 23
evb vdp timer resource-wait-delay exponent
Use
evb vdp timer resource-wait-delay exponent
to configure a VDP resource-wait-delay
exponent.
Use
undo evb vdp timer resource-wait-delay exponent
to restore the default.
Syntax
evb vdp timer resource-wait-delay exponent value
undo evb vdp timer resource-wait-delay exponent
Default
The VDP resource-wait-delay exponent is
20
.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
value
: Specifies a VDP resource-wait-delay exponent in the range of 15 to 31.
Usage guidelines
The value for VDP response-wait-delay time is expressed by the following equation:
VDP response-wait-delay time (seconds) = 2
VDP
resource-wait-delay
× 10
—
5
For detailed values, see
Table 8
.
Table 8 Values for VDP response-wait-delay time
VDP resource-wait-delay
exponent
Calculated value
(seconds)
Result value (seconds)
15 0.32768
1
16 0.65536
1
17 1.31072
2
18 2.62144
3
19 5.24288
6
20 10.48576
11
21 20.97152
21
22 41.94304
42
