2
Usage guidelines
CAUTION:
The
default
command might interrupt ongoing network services. Make sure you are fully aware of
the impacts of this command when you execute it on a live network.
This command might fail to restore the default settings for some commands for reasons such as
command dependencies and system restrictions. Use the
display this
command in interface view to
identify these commands. Then use their
undo
forms or follow the command reference to
individually restore their default settings. If your restoration attempt still fails, follow the error
message instructions to resolve the problem.
Examples
# Restore the default settings for S-Channel 1/0/1:10.
<Sysname> system-view
[Sysname] interface s-channel 1/0/1:10
[Sysname–S-Channel1/0/1:10] default
# Restore the default settings for S-Channel 1/0/1:10.1.
<Sysname> system-view
[Sysname] interface s-channel 1/0/1:10.1
[Sysname–S-Channel1/0/1:10.1] default
description
Use
description
to configure a description for an interface.
Use
undo description
to restore the default.
Syntax
description
text
undo description
Default
The default description for an interface is "
interface name
Interface." The following table shows
examples of interfaces and their default descriptions:
Interface Description
S-channel interface S-channel 1/0/1:10 S-channel
1/0/1:10 Interface
S-channel aggregate interface
Schannel-Aggregation 1:10
Schannel-Aggregation 1:10 Interface
VSI S-channel 1/0/1:10.1
S-channel 1/0/1:10.1 Interface
VSIaggregate interface
Schannel-Aggregation 1:10.1
Schannel-Aggregation 1:10.1 Interface
Views
S-channel interface view, S-channel aggregate interface view, VSI interface view, VSI aggregate
interface view
Predefined user roles
network-admin
