HPC AUTOMATE 6666HQT, Руководство пользователя

Страница: 34 / 39

LUBRICATION, PREVENTIVE MAINTENANCE,
GUARANTEE, and REPAIRS
1 . BEARINGS and SLIDING SURFACES – These are to be given a light coat of a light grease at least every six months .
2 . EXPOSED STEEL SURFACES – All remaining exposed steel shafts, etc ., should be sprayed with WD-40 or equivalent light oil every
six months . Wipe off any excess .
3 . CLEANING
–
Remove all brass chips, dirt, and grit from the surface of your machine daily with a soft bristle brush . Take particular
care in keeping the key vise jaw area clean and free of all residue build-up .
4 . CUTTER SHAFT AREA – The bearings used are “OIL-LITE” and require no additional lubrication .
5 . GUARANTEE – The machine is fully guaranteed for 90 days from the date of purchase, against factory defects in material and
workmanship . Mail the warranty card to HPC immediately, to validate your guarantee . Should your machine require factory repairs,
it should be packed securely, along with a letter stating clearly what you feel the problem is, and returned to the factory .
During the 90 day warranty period, you will be billed for the handling and shipping only . Neither HPC, Inc ., nor its distributors have
“loaner machines” available .
HPC SERVICE CENTER
If the need should arise, please note the following in order to assure you, our customer, of prompt service on your key machine
repair:
1 . The HPC Service Center answers questions involving key machines and related parts Monday through Friday from 8:00-a .m . to
4:30-p .m . Central Time .
2 . REPAIRS – The preventive maintenance and recalibration of depth and space, as fully outlined in this manual, are the only repairs
or adjustments suggested . Every effort has been made to thoroughly field test every machine for both permanent shop and/or service
truck installations . Internal operating mechanisms, while extremely simple in function and design, are
factory repairable only.
Additional repair charges may be incurred by attempting to fix these type of repairs yourself .
3 . Parts for repairing any HPC key machine can be purchased directly through the Service Center by calling our toll-free number: 800-
323-3295 . When ordering any parts over the phone, please have a list of the part numbers and descriptions ready to expedite the
ordering process . If the parts are needed in a hurry, they can be sent out UPS Next Day Air . There is an extra cost incurred when
parts are shipped this way .
4 . If you need to send an HPC key machine in for repair, pack the machine securely in a box or container strong enough to prevent
damage during shipping . Also be sure that your machine is equipped with an HPC cutter when it is sent in for repairs . Include a
letter explaining exactly what type of problem you are having and any other work you may want done on the machine . Make sure
your address and phone number are on the letter as well as the name of someone we can contact if the need arises while repairing
your machine . Our shipping address is:
HPC, Inc .
Attn: Service Center
3999 N . 25th Avenue
Schiller Park, IL 60176
5 . The usual method of payment for key machine parts is Visa or Mastercard . If you wish to have your HPC distributor billed for the
cost of repairs, they will have to call in with approval of the billing and a purchase order for the work being done, before the machine
is repaired .
6 . If while inspecting your machine our service department discovers additional problems not listed in your note, a service technician
will call you with this information and the estimated charges to repair .
7 . If after informing you of the repair estimate it becomes apparent that the cost will be higher, you will receive a call informing you of
the additional charges before any additional work is done .
English
33
AUTOMATE
™
6666HQT