HPA-Faip M 322, Руководство оператора

Страница: 36 / 59

94
M 322
Operator Manual
- Remove the valve core if it has not already been removed
(Fig. 37).
- Connect the air hose Doyfe inflator connector to the valve stem
(Fig. 38).
- Inflate the tyre with inflating gauge or by pressing the pedal
briefly and repeatedly, checking the pressure gauge frequently
to ensure that the pressure NEVER exceeds the maximum pres-
sure specified by the tyre manufacturer.
- Disconnect the inflation hose from the valve stem.
- Move the manipulator arm away from the working posi-
tion.
- Remove the wheel from the tyre changer.
6.8.c. SPECIAL PROCEDURE (FS VERSION)
The FS version uses a powerful blast of air from nozzles
near the clamping grippers to facilitate bead breaking and inflation with tubeless tyres.
Before starting with the operations described below, make sure there is no dirt, dust or
other impurities near the inflation nozzles.
CAUTION!
- Check that both the upper and lower beads and
the rim bead seat have been suitably lubricated
with approved paste for mounting.
- Move the horizontal arm fully into the working
position (Fig. 40)
- Ensure that the wheel is clamped onto the turntable
from the inner side (fig. 39).
- Lower the vertical arm to touch the wheel (fig. 41),
then lock the arm in this position
- Remove the valve core if it has not already been
removed (Fig. 42).
- Connect the air hose Doyfe inflator connector to the
valve stem (Fig. 43).
39
40
37
38