HPA-Faip M 322, Руководство оператора

Страница: 34 / 59

92
M 322
Operator Manual
If it is necessary to exceed the maximum pressure
permitted by the tyre manufacturer to break the
bead, remove the wheel from the tyre changer
and place it in the inflation cage.
Check that both the upper and lower beads and the rim bead seat have been suitably
lubricated with paste appropriate for mounting.
Safety goggles with plain lenses and safety footwear must be worn.
DO NOT clamp the wheel on the turntable during inflation.
CAUTION!
- Remove the valve core if it has not already been removed.
- Connect the inflation hose to the valve.
- Activate the inflating device to inflate the tyre and push the beads against the rims. Stop
frequently to check the internal tyre pressure on the pressure gauge.
Look carefully for any tyre damage. The following instructions must be read, under-
stood and observed precisely.
1. Tyres that are excessively inflated could explode, causing the dispersion of debris in
the air, which can cause accidents
.
2. Tyres and rims that do not have the same diameter do not correspond. Do not attempt
to mount or inflate tyres with rims that do not correspond. For example, never mount a
16” tyre on a 16.5” rim, (or vice versa). It is very dangerous. Tyres and rims that do not
correspond could explode, causing accidents.
3. Never exceed the inflation pressure for the tyre indicated by the manufacturer on the
side of the tyre itself.
Carefully check that the air hose is well inserted in the valve.
4. Never bring your head or other body parts close to a tyre during inflation or bead
insertion operations.
This machine is not a safety device against the possible explosion risk of tyres, air
chambers or rims.
CAUTION!
DANGER