HPA-Faip M 322, Руководство оператора

Страница: 38 / 59

96
M 322
Operator Manual
Risk of explosion. During the bead insertion phase, do not exceed the maximum pressure
indicated by the manufacturer on the sidewall of the tyre.
CAUTION!
Operate the inflation jets only for tyre bead insertion. Do not point jets towards people.
CAUTION!
Discharge the air from the pneumatic system before disconnecting the power supply or
other pneumatic components. The air is accumulated in the tank for operating the bead
insertion jets.
Operate the air jets only after making sure that the device is securely in position and the
rim is correctly blocked.
CAUTION!
RISK OF EXPLOSION. Do not mount a tire and a rim that do not have the same diameter
(for example, 16.5 inch tyre and 16 inch rim).
CAUTION!
If the tyre is over-inflated, air may be released by
pressing the brass manual deflation button located
below the air pressure gauge (D - Fig.47)
- Disconnect the inflation hose from the valve stem.
- Move the manipulator arm away from the work-
ing position.
- Remove the wheel from the tyre changer.
7. TROUBLE SHOOTING
The turntable does not rotate when the rotation pedal is pressed
Power cord conductor shorting to ground.
➥
Check the wiring.
Motor shorted.
➥
Replace the motor.
47
D