Operator's Manual
B 235 Evo
97
ALU 3
adhesive weight to ap-
ply manually at the 12*
o'clock position.
adhesive weight to ap-
ply manually at the
12* o'clock position
ALU 4
clip weight to apply
manually at the 12
o'clock position
adhesive weight to ap-
ply manually at the 12*
o'clock position.
ALU 5
adhesive weight to ap-
ply manually at the 12*
o'clock position.
clip weight to apply
manually at the 12
o'clock position
STA
spring weight or adhesive weight to be applied
manually at the 12 o'clock position either on the
outer or inner side or at the centre of the rim
well clip weight to be applied manually at the 12
o'clock position
ALU 1
Adhesive weight to ap-
ply manually at the
12* o'clock position
Adhesive weight to ap-
ply manually at the
12* o'clock position
ALU 2
clip weight to apply
manually at the 12
o'clock position
Adhesive weight to ap-
ply manually at the 12*
o'clock position.
dyn
BIKE
clip weight to apply
manually at the 12
o'clock position
clip weight to apply
manually at the 12
o'clock position
ALU
BIKE
adhesive weight to ap-
ply manually at the 12*
o'clock position.
adhesive weight to ap-
ply manually at the 12*
o'clock position.
*The machine allows the operator to change the application position of the adhesive
weight from 12 o'clock (via the CLIP weight-holder) to 6 o'clock (via the laser line), de-
pending on his requirements.
To change the application position for the adhesive weights, follow the instructions in
the set up menu "Adhesive weight application position”.
3. ENTERING WHEEL DIMENSIONS
(EXCEPT FOR ALU 1P AND ALU 2P
PROGRAMMES)
Wheel data entry for wheel balancers without an ultrasonic sensor
The machine allows for the diameter and distance values to be entered automatically;
the width value can be entered using the keypad.
