background image

INSTALLATION AND OPERATION MANUAL

SHIPPING DAMAGE CLAIMS

When this equipment is shipped, title passes to the 

purchaser upon receipt from the carrier. Consequently, 

claims for the material damaged in shipment must be 

made by the purchaser against the transportation 

company at the time shipment is received.

BE SAFE

Your new Bubble Balancer was designed and built 

with safety in mind. However, your overall safety 

can be increased by proper training and thoughtful 

operation on the part of the operator. 

DO NOT operate or repair this equipment without 

reading this manual and the important safety 

instructions shown inside.

1645 Lemonwood Dr.

Santa Paula, CA. 93060, USA

Toll Free 1-800-253-2363

Tel: 1-805-933-9970

Fax: 1-805-933-9160

www.rangerproducts.com

PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO 
INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT 
YOU FULLY UNDERSTAND AND  COMPREHEND THE FULL CONTENTS OF 
THIS MANUAL. FORWARD THIS MANUAL TO ALL OPERATORS. FAILURE TO 
OPERATE THIS EQUIPMENT AS DIRECTED MAY CAUSE INJURY OR DEATH. 

Manual Revision A1 - May 2020

Manual Part Number 5900229

BUBBLE BALANCER

MODEL: RWS-1B

Keep this operation manual near the 

machine at all times. Make sure that 

ALL USERS  read this manual.

Содержание RWS-1B







Отзывы:

Похожие инструкции для RWS-1B