Operator's Manual
B 235 Evo
109
23
• Manually applied adhesive weights
1 Select the first side to be balanced
2 Turn the wheel until the central element of the corresponding position indicator lights
up
3 Apply the adhesive weight manually in the position in which the relative plane was
measured, using the centre of gravity of the weight itself as reference. In this phase, one
display shows the unbalance value of the side to be balanced and the other shows the
message "H.12" that indicates the correct application position as shown in figure 24.
WARNING
The machine allows the operator to select how to apply the adhesive weight (CLIP or at
6 o'clock), depending on his requirements.
To change the application position for the adhesive weights, follow the instructions in
the set up menu "Adhesive weight application position”.
24