Operator's Manual
B 235 Evo
107
thus creating a potential danger.
Pressing the
button while the wheel is moving interrupts the wheel spin before
time and the
A STP
message is displayed.
If the “
RPA
” (centred position) programme is active, at the end of each balancing spin the
machine stops the wheel in the position for application of the weight on the inner side; if
it is equal to zero, the wheel is stopped in the position for application on the outer side.
Pressing the
button with the guard raised, automatic search for the second side
position is activated.
This function is described at length in the AUTOMATIC POSITION SEARCH section.
• Manually applied adhesive weights
- Select the first side to be balanced.
- Turn the wheel until the central element of the corresponding position indicator lights up.
- Apply the indicated balancing weight in the position of the rim corresponding to 12
o'clock.
WARNING
The application position of the adhesive weight can be changed from 12 o'clock to 6 o'clock
by following the instructions in the “Adhesive weight application position” set-up menu.
WARNING
- in the MOTORCYCLE programmes (ALU), when applying the adhesive weight always
use the 12 o'clock position as your reference, regardless of the setting made in “AD-
HESIVE WEIGHT APPLICATION POSITION”.
IMPORTANT
in the ALU1 and ALU2 programmes, the unbalance displayed by the machine on the
outer side refers to the centre of gravity of the adhesive weight in line with the shaft
assembly support flange (fig. 22)
22
