Operator's Manual
B 235 Evo
125
15.10. SET UP - LED LIGHT
The machine allows the operator to disable or modify the lighting mode.
Proceed as follows to make these settings:
- Press the
key.
- use the
keys to search for SEt UP
- press the
key to confirm
- use the
keys to search for LEd 1 (LEd 2 or LEd oFF if previously set)
- press the
key to change the setting:
or LEd oFF
to disable the lighting device
or LEd 1
to activate the lighting device when acquiring dimensions during an
ALU1 P or ALU2 P balancing programme, at the end of a spin cycle in
the case of residual unbalances for 30 seconds, in CP (centred position)
for an additional 30 seconds
or LEd 2
in this configuration, the light will turn on, in addition to the situations
indicated above (in the Led1 mode) also during the entire measure-
ment cycle, when acquiring dimensions in all balancing programmes
and in the Hidden Weight programme when selecting the two planes
behind the spokes.
- press the
key to confirm and exit.
15.11. SET UP - LASER INDICATOR
The machine allows the operator to enable or disable the laser device.
Proceed as follows to make this setting:
- Press the
key.
- use the
keys to search for SEt UP
