manualshive.com logo in svg

HP Z220 CMT Series, Руководство по техническому обслуживанию и ремонту, Страница: 59 / 198

Поделиться
Скачать
HP Z220 CMT Series Скачать руководство пользователя страница 59

Table 2-1

  Computer Setup (F10) Utility menu descriptions for the HP Z220 SFF and Z220 CMT

Workstations (continued)

Heading

Option

Description

 

Device Security

Makes the following devices available or hidden to the computer:

●

Embedded Security Device (hidden by default)

●

System Audio

●

Network Controller

●

SATA ports

With the exception of Embedded Security Device (TPM), Device Available is the
default setting for all devices (allows the operating system to access the device).
Device Hidden disables the device by the BIOS so that the operating system can no
longer enable the device.

NOTE:

An entry for enabling DriveLock appears in the setup menu if the computer

has a DriveLock-compatible hard disk drive.

 

USB Security

Set workstation USB ports to Enabled/Disabled:

●

Front USB Ports

●

Rear USB Ports

●

Internal USB Ports

Slot Security

Lets you disable any PCI or PCI Express slot.

 

Network Boot

Lets you enable/disable the ability to boot from the network using the 

F12

 key or

the boot order.

 

System IDs

Provides these options:

●

Asset Tag—A user-editable, 16-byte string identifying the computer.

●

Ownership Tag—A user-editable, 80-byte string identifying ownership of the
computer. This tag appears on the screen during POST.

●

Universal Unique Identifier (UUID)—An ID number set in the factory that
uniquely identifies the computer.

●

Keyboard—Lets you set the keyboard locale for System ID entry.

 Master 

Boot 

Record

(MBR) Security

When MBR Security is enabled, the BIOS prevents any changes being made to the
MBR of the current bootable disk while in MS-DOS or Windows Safe Mode—
(Enable or Disable).

NOTE:

Most operating systems control access to the MBR of the current bootable

disk; the BIOS cannot prevent changes that may occur while the operating system is
running.

The Computer Setup (F10) Utility

47

Содержание Z220 CMT Series







































































































































































































Отзывы:

Нет отзывов