manualshive.com logo in svg

HP Z220 CMT Series, Руководство по техническому обслуживанию и ремонту, Страница: 183 / 198

Поделиться
Скачать
HP Z220 CMT Series Скачать руководство пользователя страница 183

Configuring RAID on an LSI 2308 or LSI 9212-4i
controller 

This section explains how to use the LSI Logic Configuration Utility to set up a SATA or SAS RAID array

on the LSI 2308 or LSI 9212-4i controllers.

NOTE:

These instructions apply to Windows and Linux.

RAID 0 configuration

Follow these steps to configure an Integrated Striped (IS) volume with the BIOS-based configuration

utility. The procedure assumes that the system has the required disk and disk controllers.

1.

During startup, press 

Ctrl-C

 when prompted to start the LSI Logic Configuration Utility.

2.

Using the arrow keys, navigate to:

a.

An appropriate adapter, then press 

Enter.

b. RAID Properties

, then press 

Enter.

c.

Create IS Volume

, then press 

Enter.

3.

In the 

Create New Array

 screen, select the first disk for the IS volume. Move to the 

RAID Disk

column for this disk, and use the 

Space

 bar and 

+

 or 

–

 arrows to select 

Yes

.

NOTE:

If partitions are defined on the selected disk, a message warns you that data on the disk

will be lost when the striped volume is created.

4.

To select additional drives for the striped volume (up to the maximum number allowed for the

workstation), repeat step 3.

5.

When all drives are selected, press 

C

 to create the array. Navigate to 

Save changes then

exit this menu

 and press 

Enter.

6.

When the new array is created, the 

Adapter Properties

 screen appears. Press 

Esc

 twice, then

select 

Exit

.

Configuring RAID on an LSI 2308 or LSI 9212-4i controller

171

Содержание Z220 CMT Series







































































































































































































Отзывы:

Нет отзывов