manualshive.com logo in svg

HP Z220 CMT Series, Руководство по техническому обслуживанию и ремонту, Страница: 58 / 198

Поделиться
Скачать
HP Z220 CMT Series Скачать руководство пользователя страница 58

Table 2-1

  Computer Setup (F10) Utility menu descriptions for the HP Z220 SFF and Z220 CMT

Workstations (continued)

Heading

Option

Description

◦

Hard Drive

◦

Network Controller

You can take the following actions:

●

Press 

Enter

 to drag a device with the arrow keys to a preferred place, then

press 

Enter

 again to drop the device in place.

●

Press 

F5

 to remove the device from consideration as a bootable device.

●

You must confirm changes by selecting 

File>Save Changes and Exit

 and then

press 

Enter

. The computer then stores boot order changes in the physical

ROM.

To temporarily override the boot order and boot from a device other than the
default device specified in Boot Order:

1.

Restart the computer.

2.

Press 

F9

 when the 

F9=Boot Menu

 message appears on the screen.

3.

Wait for POST to finish and for the list of bootable devices to display.

4.

Use the arrow keys to select the preferred boot device.

5.

Press 

Enter.

 The computer then starts from the selected nondefault device. (This

does not change the default boot device.)

Security

Setup Password

Lets you set and enable a setup password for the administrator.

If you create a setup password, you must use it to change computer setup options,
to flash the ROM, and to make changes to certain Plug and Play settings under
Windows.

 

Power-On Password

Let you set and enable the power-on password.

 

Password Options

This option becomes available depending on the presence of setup or power-on
passwords. It provides these options:

●

Lock Legacy Resources (Enabled/Disabled)—Prevents the operating system
from changing resources to serial, parallel, or diskette controller. (Appears if a
setup password is set.)

●

Setup Browse Mode (Enabled/Disabled)—Lets you view but not change the
F10 Setup Options without having to enter the setup password. (Appears if a
setup password is set.)

●

Password prompt on F9 and F12 (Enabled/Disabled)—Lets you access menus
without entering the setup password.

●

Network Server Mode (Disabled/Enabled)—Enables network server mode.
(Appears if a power-on password is set.)

 Smart 

Cover

Lets you enable/disable the cover removal sensor

1

.

46

Chapter 2   System management

Содержание Z220 CMT Series







































































































































































































Отзывы:

Нет отзывов