manualshive.com logo in svg

HP Z220 CMT Series, Руководство по техническому обслуживанию и ремонту, Страница: 174 / 198

Поделиться
Скачать
HP Z220 CMT Series Скачать руководство пользователя страница 174

A Linux technical notes

HP offers a variety of Linux solutions for HP workstation customers:

●

HP certifies and supports Red Hat Enterprise Linux (RHEL) on HP workstations.

●

HP certifies SUSE® Linux Enterprise Desktop (SLED) on HP workstations.

●

HP offers a SLED 11 preload on some Z series Workstations.

For Linux set up and restore procedures, see the user guide for your workstation at

http://www.hp.com/support/workstation_manuals

.

Topics

System RAM on page 162

Audio on page 162

Network cards on page 163

Hyper-Threading Technology (HTT) on page 163

NVIDIA

®

 Graphics Workstations on page 164

NOTE:

After you set up the operating system, make sure the latest BIOS, drivers, and software

updates are installed.

CAUTION:

Do not add optional hardware or third-party devices to the workstation until the

operating system is successfully installed. Adding hardware might cause errors and prevent the

operating system from installing correctly.

System RAM

HP supports different amounts of total RAM in various HP workstations based on the number of

hardware DIMM slots and the capabilities of the system. The total memory supported for each

configuration is listed in the 

Hardware Support Matrix for HP Linux Workstations

 at

http://www.hp.com/support/linux_hardware_matrix

.

Audio

All HP workstations come with built-in audio hardware. The audio hardware is supported by the

Advanced Linux Sound Architecture

 (ALSA) drivers included with all modern Linux distributions.

The audio hardware provides basic playback and recording features. The ability to simultaneously play

audio from multiple sources, such as applications and CDs, is provided by software mixing functionality

in the ALSA driver. The performance of software audio mixing and playback functionality is greatly

improved in ALSA version 1.0.13 and later drivers.

162

Appendix A   Linux technical notes

Содержание Z220 CMT Series







































































































































































































Отзывы:

Нет отзывов