HP -UX B6941-90001, Справочное руководство администратора

Страница: 55 / 548

Chapter 2 55
Installing ITO Agents on the Managed Nodes
General Installation Tips for Managed Nodes
NOTE
Use the
opcactivate
command with the
-mode
option to activate:
hacmp for ITO agents on AIX HACMP systems. See also
“Installation Prerequisites for AIX HACMP Agents”
on page 58
cluster
server/client
for ITO agents on AIX Cluster-Client systems after
the ITO agent software package has been installed
on the AIX Cluster Server system. For more
information, see “Manually Activating the ITO
Agent on NFS Cluster Clients” on page 169.
See the man page opcactivate(1m) for more information.
2. After the node is connected to the network execute the following two
commands on the management server:
a.
/opt/OV/bin/OpC/opcsw -installed <node>
b.
/opt/OV/bin/OpC/opchbp -start <node>
This will update the database and start heartbeat polling for the
node. The templates, monitors, commands, and actions must still be
installed using the ITO administrator GUI.
Activate the Node Using the ITO GUI:
After the node with the pre-installed agent is connected to the network,
use this procedure to activate and register the managed node.
1. Add the pre-installed node(s) to the
ITO Node Bank
using the menu
sequence
Actions:Node->Add
.
2. Add the node to an ITO node group. The easiest way to do this is to
drag and drop it onto a node group in the
ITO Node Group Bank
window
.
3. Distribute the ITO configuration to the node:
a. Select
Actions:Agents->Install
from the menubar of the
ITO
Node Bank
. The
Install /Update ITO Software and
Configuration
window opens.
b. Select all components and click
[OK]
.