background image

2

Legal Notices

Hewlett-Packard makes no warranty of any kind with regard to this
manual, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose.
 Hewlett-Packard
shall not be held liable for errors contained herein or direct, indirect,
special, incidental or consequential damages in connection with the
furnishing, performance, or use of this material.

Warranty. A copy of the specific warranty terms applicable to your
Hewlett-Packard product and replacement parts can be obtained from
your local Sales and Service Office.

Year 2000 Readiness. Hewlett-Packard has made every effort to ensure
the accuracy of our product testing. However, because each customer's
environment is different from Hewlett-Packard's laboratory test
environment, it is the customer's responsibility to validate the Year 2000
readiness of these products in their own environment. Therefore,
information about the Year 2000 status of Hewlett-Packard products is
provided “as is” without warranties of any kind and is subject to change
without notice.

Hewlett-Packard makes no representation or warranty respecting the
accuracy or reliability of information about non-Hewlett-Packard
products. Such information, if any, was provided by the manufacturers of
those products and customers are urged to contact the manufacturer
directly to verify Year 2000 readiness.

The information provided here constitutes a Year 2000 Readiness
Disclosure for purposes of the Year 2000 Information and Readiness
Disclosure Act.

Restricted Rights Legend. All rights are reserved. No part of this
document may be photocopied, reproduced, or translated to another
language without the prior written consent of Hewlett-Packard
Company. The information contained in this document is subject to
change without notice.

Use, duplication or disclosure by the U.S. Government is subject to
restrictions as set forth in subparagraph (c) (1) (ii) of the Rights in
Technical Data and Computer Software clause at DFARS 252.227-7013

Содержание -UX B6941-90001





































































































































































































































































































































































































































































































































































Отзывы: