HP TouchSmart 300-1000 - Desktop PC, Руководство по началу работы

Страница: 84 / 124

18
User Guide (Features may vary by model)
2 For S-Video, connect the left and right audio cables from your set-top box to the left (white) and right
(red) Audio Line In connectors (
B ) on the back of the computer.
Setting up for remote control use (optional)
You must connect an IR emitter (blaster) cable to the computer and your set-top box to use the remote
control properly.
The IR emitter cable is a remote control sensing device that connects to the computer and covers the remote
sensor on a set-top box. When you are selecting TV channels in Windows Media Center, it enables the
remote control to work with your set-top box.
1 Connect the IR emitter cable ( A ) to the IR Out connector ( D ) on the back of the computer.
2 Remove the paper from the backing tape on the end of the cable ( B ), and then press the end of the
cable over the remote IR sensor (receiver) window on the set-top box ( C ). To locate the remote infrared
sensor window, shine a flashlight through the plastic on the front of the set-top box.
3 When you use the remote control, point it at the front of the HP TouchSmart PC ( E ), not at the
set-top box.
Windows Media Center setup wizard
Select models only
1 Tap the Start button, tap All Programs , and then tap Windows Media Center .
2 Follow the onscreen instructions to set up your TV tuner and Windows Media Center TV program guide.
For more information about setting up and using Windows Media Center, go to: www.microsoft.com ,
or tap the Start button, tap Windows Media Center , tap Tasks , and then tap learn more .
B
A
C
D
E