HP StorageWorks NAS 1000s Скачать руководство пользователя страница 96

Страница: 96 / 172

Folder and Share Management

NAS 1000s Administration Guide

Modifying Share Properties

To change share settings:

1. From the Shares menu, select the share to modify and then click Properties. The General

tab of the Share Properties dialog box is displayed.

Figure 51: Share Properties dialog box, General tab

The name and path of the selected share is displayed.

2. To enter or change client protocol information, check the appropriate boxes and then click

the corresponding tabs.

■

CIFS Sharing

■

NFS Sharing

■

FTP Sharing

■

Web Sharing (HTTP)

■

NetWare Sharing (NCP)

■

AFP (AppleTalk) Sharing

Each of these tabs is discussed in the following paragraphs.

3. After all share information has been entered, click OK. The Share menu is displayed

again.

CIFS Sharing

From the CIFS Sharing tab of the Share Properties dialog box:

1. Enter a descriptive Comment, and the User limit (optional).

See

Figure 52

for an example of the CIFS Sharing tab screen display.

2. If file caching on the client machines is allowed, click Enable file caching on client

computers accessing this share.

Содержание StorageWorks NAS 1000s













































































































































































Результаты поиска

Содержание StorageWorks NAS 1000s

Отзывы:

HP StorageWorks NAS 1000s, Руководство администратора, Страница: 96 / 172

Результаты поиска

Содержание StorageWorks NAS 1000s

Отзывы: