HP StorageWorks NAS 1000s Скачать руководство пользователя страница 161

Страница: 161 / 172

PSM Error Codes

161

NAS 1000s Administration Guide

0xC0000005

An Access Exception occurred.
Action: Save the system eventlog and contact your vendor's technical

support.

0xC0000008

User performing PSM function without opening PSM.
Action: Save the system eventlog and contact technical support.

0xC000000D

An invalid parameter was passed to a function.
Action: Save the system eventlog and contact technical support.

0xC000000E

Device name is not recognized by PSM.
Action: Save the system eventlog and contact technical support.

0xC0000010

An invalid IOCTL was sent to the driver.
Action: Save the system eventlog and contact technical support.

0xC0000013

Access to a virtual volume has been attempted after it has been destroyed.
Action: Do not access virtual volumes after they have been destroyed.

0xC000001C

An invalid IOCTL was sent to the driver.
Action: Save the system eventlog and contact technical support.

0xC0000022

An access exception occurred.
Action: Save the system eventlog and contact technical support.

0xC0000022

You do not have sufficient rights to the cache file directory.
Action: Save the system eventlog and contact technical support.

0xC0000023

Specified buffer size is too small.
Action: Save the system eventlog and contact technical support.

0xC0000034

Cache file name is invalid.
Action: Save the system eventlog and contact technical support.

0xC000003A

An invalid path was given for the cache file.
Action: Save the system eventlog and contact technical support.

0xC000003B

An invalid path was given for the cache file.
Action: Save the system eventlog and contact technical support.

0xC000003E

Bad sector was detected in the cache file.
Action: Save the system eventlog and contact technical support.

0xC0000043

A file cannot be opened because the share access flags are incompatible.
Action: This occurs when the very last snapshot is deleted. PSM initializes its

files when the last snapshot is deleted. While it is initializing, a new

snapshots can not be created. Try again in a few minutes.

0xC000009A

There is insufficient memory available.
Action: Save the system eventlog and contact technical support.

0xC00000B5

I/O timed out while reading from the cache file.
Action: Save the system eventlog and contact technical support.

0xC00000BA

The cache location must be a file rather than a directory.
Action: Save the system eventlog and contact technical support.

0xC00000E8

Invalid buffer address passed for I/O.
Action: Save the system eventlog and contact technical support.

Table 5: PSM Error Codes

Error Code

Description

Содержание StorageWorks NAS 1000s













































































































































































Результаты поиска

Содержание StorageWorks NAS 1000s

Отзывы:

HP StorageWorks NAS 1000s, Руководство администратора, Страница: 161 / 172

Результаты поиска

Содержание StorageWorks NAS 1000s

Отзывы: