manualshive.com logo in svg

HP StorageWorks NAS 1000s, Руководство администратора, Страница: 42 / 172

Поделиться
Скачать
HP StorageWorks NAS 1000s Скачать руководство пользователя страница 42

Persistent Storage Manager

42

NAS 1000s Administration Guide

Note:  

Defragmentation can not be performed if snapshots exist. To defragment a disk, first delete 

the snapshots. Drive defragmentation only operates on volumes formatted with a 4 KB or smaller 

allocation size. HP recommends larger allocation cluster sizes to improve performance.

PSM and Backup

Because snapshots are quick to create, it is possible to capture a coherent view of the volume 
data with little or no application downtime. Lack of application downtime removes the 
traditional backup window or the amount of time taken to back up to offline media. While 
many applications must be shut down to capture an accurate backup, snapshots capture a point 
in time view of the data that can be used as the source of backup data. Applications can 
continue processing against the volume. Therefore, applications may only have to be 
interrupted for a few seconds during the snapshot process. 

Caution:  

Snapshots are not a replacement for reliable, periodic data backup. If free cache 

space becomes critical, snapshots are automatically deleted. See the "Automated Snapshot 

Deletion" section. In addition, snapshots are a short term convenience and may reside on 

the same physical drives as the data. If something happens to the data drives, the snapshots 

are also affected. Read Appendix A for suggestions on how to back up the NAS device.

Although snapshots provide a mechanism for backup that does not require downtime, there are 
some considerations that should be given when performing backup and restore of a system 
using snapshots. HP recommends you review this section prior to establishing backup and 
restore policies. Backup and Restore programs are not trivial applications. As such they 
require effort to set up and use effectively. Given the nature of these products, it is critical that 
any backup and recovery plan be thoroughly tested before use on a live system.

Be sure to use a backup program that is PSM aware and has been certified for operation with 
PSM. This is especially true for open file options, system agents, and disaster recovery. 

For backup:

■

For base volumes that have snapshots in use or when backing up snapshots, archive bit 
resets and incremental backups should not be used. Archive bit resets are recorded as a 
change to the data and can fill the cache file with changes. Incremental backups make use 
of the archive bit set as well. Note if the snapshot is set to read only the backup will also 
fail.

■

Be careful in the selection of folders, since snapshot folders provide a view into the data 
that can result in the backup of multiple views of the data. Forcing the backup to grow 
based on the number of snapshots in use.

■

Junction points should be turned off to prevent the traversal of multiple snapshot 
directories of base volume backups.

■

Junction points should be turned on when backing up a single snapshot. Be sure to pick the 
single snapshot and not the root folder. Selecting the root folder will cause multiple 
snapshot backups.

Содержание StorageWorks NAS 1000s













































































































































































Отзывы:

Нет отзывов