HP StorageWorks NAS 1000s Скачать руководство пользователя страница 162

Страница: 162 / 172

PSM Error Codes

162

NAS 1000s Administration Guide

0xC000010A

PSM was told to shut down.
Action: Save the system eventlog and contact technical support.

0xC0000184

Something has gone wrong with PSM.
Action: Save the system eventlog and contact technical support.

0xC0000185

An error occurred on the device.
Action: Save the system eventlog and contact technical support.

0xC0000206

Buffer size supplied is insufficient to hold requested information.
Action: Save the system eventlog and contact technical support.

0xE0001001

PSM could not start due to the server being constantly busy for minutes.
Action: Take a snapshot when the system demands are lower.

0xE0001002

PSM detected a deadlock.
Action: Check what other filter drivers you are running (i.e., virus scanners,

etc.) Save the system eventlog and contact technical support.

0xE0001003

Specified volume not active or deleted.
Action: Do not delete volumes with active snapshots.

0xE0001004

PSM was specified for a volume that is currently not being PSM'ed.
Action: Save the system eventlog and contact technical support.

0xE0001005

Cache file overflow caused all existing snapshots to be deleted.
Action: Increase the cache file size in Windows 2000 for NAS

(Disks/Persistent Storage Manager), or take/schedule snapshots when fewer

users are online.

0xE0001006

The application tried to enable PSM without first calling Psm_Register.
Action: Programmatically, a program must register with PSM prior to

sending it commands.

0xE0001007

Invalid license code.
Action: Contact vendor for a valid license.

0xE0001008

Another application already has PSMed locked exclusively.
Action: Save the system eventlog and contact technical support.

0xE0001009

PSM needs to be locked exclusive for this function to work.
Action: Save the system eventlog and contact technical support.

0xE000100A

Wrong version of the driver has been loaded on this system.
Action: Verify the PSM version, save the system eventlog and contact

technical support.

0xE000100B

A reboot is required before PSM can operate.
Action: Reboot the machine, and try taking a snapshot again. If this still

fails, save the system eventlog and contact technical support.

0xE000100C

PSM is not installed.
Action: Save the system eventlog and contact technical support.

0xE000100D

An incompatible DLL from another version of PSM is already loaded.
Action: Verify the PSM version, save the system eventlog and contact

technical support.

0xE000100E

Out of memory.
Action: Close unnecessary applications or add more memory.

Table 5: PSM Error Codes

Error Code

Description

Содержание StorageWorks NAS 1000s













































































































































































Результаты поиска

Содержание StorageWorks NAS 1000s

Отзывы:

HP StorageWorks NAS 1000s, Руководство администратора, Страница: 162 / 172

Результаты поиска

Содержание StorageWorks NAS 1000s

Отзывы: