HP Series 200, Руководство по установке

Страница: 41 / 144

C. Set the Correct Time and Date (Optional)
Each time you power up the router, it starts with a default time and date.
Whether you set the correct time and date or not depends on how you
want the time and date to be maintained in your network. When the time
and date in one router is used as the source for time and date in another
router, the time/date control is termed the “Time Protocol service”. Use
the following table to:
1. Identify the Time Protocol usage for your router.
1. Determine whether to set the date and time:
If the router will operate as a: Set date and time?
Client of Time Protocol service
Server of Time Protocol service
Both Client and Server of Time Protocol service
Neither client nor server of Time Protocol
service No
Yes
No*
Yes
*
The router designated as “server only” provides the Time Protocol service. If
no router is designated “server only”, then a client/server router should pro-
vide the Time Protocol service.
If you need to set the time and date, use the NCL Time command:
1. From the Main menu, select the Network Control Language
Interpreter.
2. At the NCL prompt at the bottom of the screen (page 1-30), enter the
Time command with the date and time, as follows:
time mm/dd/yy hh:mm:ss
where:
mm
= month
hh
= hour
dd
= day
mm
= minutes
yy
= year
ss
= seconds
Use the Exit command to exit from NCL and return to the Main
menu.
For more information on the Time command, refer to the Operator’s
Reference .
I
n
s
ta
ll
a
t
io
n
1
Installation
Phase 4: Initialize and Verify the Router
1-33